{"product_id":"rms-source-coil-hon-atc185-atc200-atc250-80-86-rm00042","title":"RMS SOURCE COIL HON ATC185 ATC200 ATC250 80-86 RM00042","description":"RMS SOURCE COIL HON ATC185 ATC200 ATC250 80-86 RM00042 \u003ch3\u003eRead these instructions completely before beginning:\u003c\/h3\u003e\n\u003cstrong\u003eStep 1\u003c\/strong\u003e : Take the ignition cover off. Are the remplacement parts similar? \nCompare the replacement part to the original. \nThe remplacement part should match, including the mounting hole locations, If not: Double check the application listing with your bike.\u003cbr\u003e\n\u003cstrong\u003eStep 2\u003c\/strong\u003e :Take note of the wire colors of the original stator wires and disconnect them from the wiring loom.\u003cbr\u003e\n\u003cstrong\u003eStep 3\u003c\/strong\u003e: Remove the flywheel using a proper puller tool.\u003cbr\u003e\n\u003cstrong\u003eStep 4\u003c\/strong\u003e: Remove the baseplate with the original coil.\u003cbr\u003e\n\u003cstrong\u003eStep 5\u003c\/strong\u003e: Remove the screws that secure the coil and take the coil off.\u003cbr\u003e\n\u003cstrong\u003eStep 6\u003c\/strong\u003e: Cut the original wire close to the original coil. Take a good look at how the wire is connected to the coil.\nConnections: Connect the old wire up to the new coil. Use a soldering iron and resin core solder. (the type used in electrical applications\u003cbr\u003e\n\u003cstrong\u003eStep 7\u003c\/strong\u003e: Mount the coil onto the baseplate, fit the screws using locking compound on the threads and TIGHTEN THE SCREWS SECURELY!\n\u003cstrong\u003eStep 8\u003c\/strong\u003e: Refit the stator baseplate. Ensure the wires CANNOT TOUCH THE FLYWHEEL! (especially on the inside of the flywheel)\u003cbr\u003e\n\u003cstrong\u003eStep 9\u003c\/strong\u003e: Refit the flywheel. Tighten the bolt to specified torque.\u003cbr\u003e\n\u003cstrong\u003eStep 10\u003c\/strong\u003e: Fit the ignition cover.\u003cbr\u003e\n \n\u003ch3\u003eTROUBLESHOOTING:\u003c\/h3\u003e\nEngine will not start: Sometimes the source coil wires are reversed. Swap the connections, re-solder the wires and the engine should start. If the engine still does not start, and before calling technical support, performs a few basic tests:\u003cbr\u003e\n\u003cstrong\u003e\u003col\u003e\n\u003cli\u003eRe-check the connections. Make sure you carefully solder the connections. Twisting wires together or taping wires will cause engine inoperability.\u003c\/li\u003e\n\u003cli\u003eCheck the engine for spark.\u003c\/li\u003e\n\u003cli\u003eIs fresh fuel in the gas tank?\u003c\/li\u003e\n\u003c\/ol\u003e\u003c\/strong\u003e\n\u003cstrong\u003eIf you still cannot get the engine to start, have all your testing information ready for a technician prior calling.\u003c\/strong\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003eDimensions:\u003cbr\u003e\nDistance between fixation holes:  58 mm\u003cbr\u003e\nResistance : 250 ohms +- 20%","brand":"RMS","offers":[{"title":"Default Title","offer_id":48130916221083,"sku":"RMSRM00042","price":38.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/9742\/0187\/files\/351-210010.jpg?v=1778963799","url":"https:\/\/grmotorcycle.com\/products\/rms-source-coil-hon-atc185-atc200-atc250-80-86-rm00042","provider":"GR Motorcycle","version":"1.0","type":"link"}