RMS IMPROVED STATOR HUSABERG/HUSQVARNA 1999-03 RM01193

RMS IMPROVED STATOR HUSABERG/HUSQVARNA 1999-03 RM01193

Brand new improved SEM Direct replacment stator

• Direct replacement of original SEM manufactured stator even if the look is different
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Produces a stronger spark when starting and offers a reliable performance
• Pick up coil included
• All product shipped are tested

All item pictures are accurate

This stator has a different design than your original how ever it is a direct fit.

Instructions:

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

This stator is an improved version of the original but it is a direct fit

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Specifications:

Dimensions :
Interior diameter : 28mm
Exterior diameter : 91mm
Thickness : 23mm
Length of wires stator to plug : 700mm

Other specifications :
Number of wires : 6
Number of plugs : 6
Number of pins : 6

Wire to wire resistance :
Alternator :Yellow Between each Yellow = 0.4 ohms +/-20%
Pickup : Black To Green = 179 ohms +/-20%
Source : Red To Black = 1260 ohms +/-20%

Warning:

For Husqvarna models, compare the resistances of your original stator with ours on the "Specifications" tab.

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.